Categories

False alarms and system malfunctions can be aggravating, and even worse, might prevent your home’s security from working the way it should. Thankfully, most issues, from dead batteries to false alarms, are simple to correct. Explore our suggestions for troubleshooting your home alarm system in Davenport. We’ll help you keep your family members protected and your system operating the way it should.

Test Your Home Security System In Davenport

One effective way to troubleshoot your home’s security is to test it! The latest systems let you place them in test mode to avoid initiating an emergency call. Once in test mode, follow these steps:

• Turn on your system as you would when heading out.
• Open a window or door protected by a contact sensor, or try to set off another device. Close the window or door so it doesn’t trip the alarm when you switch the system back on.
• Let the alarm resonate for 60 seconds to ensure communications with the security company and to produce an entry in the alarm system log.
• Proceed to test devices as you wish
• Inspect the alarm’s activity log to validate functionality.

Don’t worry, monitoring professionals will know that your system is involved in a test. Just be sure to switch off test mode when complete. It’s wise to test monthly or anytime you change your home’s internet or phone provider.

Evaluate The Position And State Of Motion Detectors

Although an crucial part of your alarm system, motion sensors are notorious for false alarms. Do your part to prevent them with a few straightforward troubleshooting steps.

• Perform a visual inspection. Is there anything that could shift within the sensor’s detection zone, like drapery taken by a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can cause malfunctions. Check to confirm the sensor is clean.
• Does the motion detector have pet immunity you can enable? Some can be set to disregard pets weighing as much as 100 pounds.
• When was the battery replaced? Low batteries might impact performance or result in false alarms.
• Is the sensor aimed toward a heat source? Excessive heat from direct sun or a fireplace can set off an alarm.

Keep Batteries On Hand And Watch Out For Low Battery Notifications

One of the great things about modern home security systems is that they’ll alert you when batteries are running low. If your system is equipped with a smartphone app or control panel, you’ll often find notifications there. Depending on the alarm, you might notice an occasional beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless devices have batteries that should be replaced every 1 to 2 years. It’s a good idea to keep batteries on hand and establish a replacement schedule. Top systems also have a rechargeable backup battery for the main control panel. This battery keeps your system functioning if your power goes out and should recharge once power is back online. If it doesn’t, you will need to replace it.

Troubleshooting Is Effortless With ADT Home Security In Davenport 

As the top name in home security, ADT designs systems that offer unrivaled protection and functionality. Switching to test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always receive alerts when a battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Davenport home and family. Dial (563) 231-4633 or fill out our form today!