ADT® Authorized Dealer Serving Davenport & Entire Quad Cities Area
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Davenport Residence

Property owners must protect against numerous risks like fire, flooding, and burglary. But what about a risk that can’t be discerned by human senses? Carbon monoxide presents an uncommon challenge because you might never be aware that it’s there. Even so, implementing CO detectors can effectively safeguard your loved ones and property. Find out more about this dangerous gas and where to place carbon monoxide detectors in your Davenport residence.

What Is Carbon Monoxide?

Called the silent killer as of a result of its lack of color, taste, or odor, carbon monoxide is a commonly found gas formed by the incomplete combustion of fuels. Any fuel-burning appliance like a furnace or fireplace can produce carbon monoxide. Even though you normally won’t have any trouble, complications can crop up when an appliance is not regularly inspected or appropriately vented. These mistakes could result in a proliferation of the potentially lethal gas in your residence. Generators and heaters of various types are the most frequent causes for CO poisoning.

When exposed to lower amounts of CO, you could notice dizziness, headaches, fatigue nausea, or vomiting. Continuous exposure to elevated concentrations could lead to cardiorespiratory failure, and even death.

Recommendations On Where To Place Davenport Carbon Monoxide Detectors

If you don’t use a carbon monoxide detector in your home, buy one now. Ideally, you ought to use one on every floor of your home, and that includes basements. Here are a few suggestions on where to place carbon monoxide detectors in Davenport:

  • Place them on every floor, particularly in places where you utilize fuel-burning appliances, including fireplaces, furnaces, water heaters, and gas dryers.
  • Always install one no more than 10 feet away from bedroom areas. If you only get one carbon monoxide detector, this is where it should go.
  • Place them approximately 10 to 20 feet away from potential CO sources.
  • Avoid placing them directly beside or above fuel-utilizing appliances, as a small amount of carbon monoxide may be discharged when they turn on and set off a false alarm.
  • Secure them to walls approximately five feet off the floor so they will sample air where people are breathing it.
  • Avoid using them near windows or doors and in dead-air areas.
  • Put one in spaces above garages.

Test your CO detectors routinely and maintain them according to manufacturer instructions. You will typically have to replace units in six years or less. You should also ensure any fuel-utilizing appliances are in in proper working order and adequately vented.